Case study

The cost of neglect: Why racking maintenance should never wait

Jan 31, 2025 | Pallet Racking

Pallet racking plays a leading role in the warehouse where it facilitates effective inventory management, promotes space optimisation, and drives overall efficiency. It does this with a high degree of robustness and proficiency, however such competencies can often be seen as a given, until a serious issue arises.

Recognising the risks associated with pallet racking

Pallet racking is a significant steel structure composed of multiple components and is designed to stand independently within the warehouse environment. Functioning to support large-scale palletised stock, the need for a durable and secure framework is evident.

A pallet racking system developed and implemented by a trusted and reputable provider is undoubtedly built to last, however the industrial environment together with frequent use, exposes the structure to knocks, bumps and general wear and tear. Continuous maintenance is a preventative measure and is essential to ensuring the longevity, integrity and safety of your pallet racking.

A busy warehouse with VNA racking

Pallet Racking Maintenance: What’s Involved?

Proactive maintenance supports the persistent safety of pallet racking structures, promoting workplace safety, inventory safeguarding and regularity compliance. Well-maintained racking also helps to avoid additional expenses in relation to repairs, downtime, serious incidents and higher insurance premiums. To assist in keeping your pallet racking structure safe, consider the following:

Schedule Annual Racking Inspections by Professionals

Acting when a pallet racking component requires attention comes after awareness of the issue, making racking inspections a crucial part of the ongoing maintenance of your pallet racking system. Carried out on a yearly basis, a professional inspection can alert you to issues that could otherwise go unnoticed, allowing the risk to discreetly increase before a potentially catastrophic incident takes place.

A professional inspection carried out in accordance with SEMA recommended guidelines is strongly advised. Referring to the Storage Equipment Manufacturers Association, SEMA is the UK’s most trusted authority concerning industrial storage safety. Working closely with industry regulators, SEMA offers expert and impartial advice to educate the industry and enable warehouse operators to meet their legal obligations. SEMA guidelines help to classify damage severity with appropriate actionable timescales using this traffic light system:

  • Green – Minor damage is detected and must never be dismissed. The extent of the damage falls withing SEMA limits and demands routine monitoring.
  • Amber – Notably severe damage is detected, and this requires response action. Immediate offloading is not necessary; however, the concerned locations must not be refilled once emptied and repairs must be completed within four weeks. Non-compliance with this will result in the severity level moving to red.
  • Red – Critical damage has been detected with immediate action required. This includes offloading the concerned location immediately and ensuring it remains out of service until the necessary repair works have been completed.

If you have any concerns in relation to the safety of your racking system or believe your system hasn’t been inspected within the last twelve months, contact WSL’s rack inspections department on 0113 2045350 to enquire about the availability of our professional inspectors.

Useful Download: Racking Inspections Leaflet

Racking being professionally inspected

Carry out Internal Routine Inspections

Internal routine inspections are carried out by selected team members who are tasked with frequent inspections and reporting issues accordingly. This allows the Person Responsible for Racking Safety (PPRS) to take appropriate action, helping to maintain safety between annual inspections. Depending on the level of risk within the warehouse, these inspections may be carried out on a daily, weekly or monthly basis.

For internal racking inspections to be carried out properly, the inspectors must undergo racking inspection training to acquire the knowledge needed to complete the inspection properly. Racking inspection training is available through WSL with our professional inspectors conducting the training. On completion, delegates are provided with certification to certify that the delegate is trained to carry out periodic racking inspections which includes looking for twisted or damaged uprights, beam deflection, fixings, insecure footplates and other safety issues.

Useful Download: Racking Inspection Training Leaflet

Example diagrams below illustrate common areas of damage. During the training, delegates will learn about the tolerances for each type of damage:

Damage diagrams

Provide Full Training for Forklift Truck Operators

Whilst forklift trucks are often integral to pallet racking systems, they can pose significant risks if not handled properly. To maximise safety, employees should never be authorised to operate a forklift truck until the hold a valid licence, obtained through proper training and after passing a comprehensive test. Conducted by a competent instructor, this training educates operators about the hazards associated with forklift trucks and covers safe driving techniques, manoeuvring skills, and proper handing methods, including the safe placement and retrieval of pallets. Competent FLT operators mitigate the risk of a serious forklift-related incident, including a collision between the vehicle and the racking structures. A minor bump involving a single component has the potential to compromise the whole structure and could lead to a serious safety hazard. Therefore, minimising such risks and maintaining a safe working environment must be a priority for any warehouse.

Shuttle racking system and fork lift truck in operation

Install the Necessary Pallet Racking Safety Ancillaries

Safety ancillaries consist of various supporting components fitted to or around the racking system. They function as a safeguard against potential incidents, protecting employees and the warehouse environment. Some of those ancillaries include:

  • End of rack barriers – These are robust rails at a height designed to prevent a forklift from bumping into the rack end as it travels along the cross aisle. Without these barriers, the rack end frames can be vulnerable so rather than a collision into the frames, the barriers take the impact instead.
  • Upright protectors – These are guards moulded around the bottom of the uprights which are situated along the working aisles, close to where the heavy forklifts operate when loading and offloading pallets. This increases the vulnerability of the uprights which could weaken under the weight load should a collision occur.
  • Guide rails – These strips of steel, ground level rails run the length of narrow aisles in which a forklift must operate, often manoeuvring forward and reverse. The rails prevent any veering from resulting in a collision with the structure itself.
  • Decking – The gap between the front and rear beam may be too wide for smaller loads such as containers or narrow pallets. Decking provides a solid surface on which these can be placed without the risk of falling through a gap too wide. This prevents injury as well as damage to inventory and the structure. Decking is available in several materials including timber, steel mesh, steel panels and chipboard, allowing an option most suited to your operation and budget.
  • Beam locks – To prevent a pallet from accidentally pushing a beam out of place whilst placing or receiving a pallet, beam locks are designed to secure the beams in place. Beam locks which are clipped into place, securing both ends can vary in shape, material and how they are fastened into place. The beams of a particular pallet racking system must be secured using the beam locks designed for that system, by the same manufacturer.
  • Anti-collapse mesh – Steel wired mesh is a useful material for securing danger zones in the warehouse, including the rear side of a racking system. Anti-collapse mesh can be fitted to the back of racks to prevent loose items from falling, which can cause injury or damage, whilst the openings between the steel wires enables visibility. Nylon or fibre-based netting is another option. The flexible material makes this a light weight yet effective solution with
  • Weight load notices – Designed to help prevent pallet racking overload, weight load notices feature easy-to-read diagrams, text and colours, conveying important safety information, including the maximum weight load. They should be situated in visible locations on the racking to provide fast and easy refence. New pallet racking provided by SEMA Members should include the SEMA logo.

While not all the ancillaries listed are essential for every pallet racking system, it’s important to consider which installations will best safeguard your specific operation. WSL’s expert technicians are always available to provide guidance and recommend the most effective ancillaries for your warehouse.

racking complete with barriers, upright protectors and weigh load notices

Master the Best Practices for Pallet Racking Repairs

Should a repair be required following the SEMA traffic light system, SEMA strongly advises on the following directives:

  • Replace damaged components rather than repair.
  • Always replace damaged components with the exact same components with warranty from the same manufacturer. Never mix brands.
  • Never use heat or welding on damaged components
  • Bending components to force them back into place is unsafe, therefore unacceptable.
  • All rectification works to be carried out by a qualified professional with completion to SEMA codes.

Although SEMA codes of practice are not subject to legal enforcement, the HSE (Health & Safety Executive) frequently cites them during the application of safety regulations. This gives weight to the significance to the codes and exhibits their relevance to current safety standards.

Damaged component

Be Informed of your Legal Racking Safety Obligations

SEMA codes prioritise safety in the design, Installation, usage, inspections and maintenance of industrial storage systems. Any business operation which utilises storage equipment should ensure adherence to specific legislations, some of which are covered in the following documents:

  • Provision and Use of Work Equipment 1998 (PUWER) – Pallet racking is classified as workplace equipment which must be safe to use, used safely and include instructions, manuals and warnings under this legislation.
  • Workplace Health, Safety & Welfare Regulations 1992 – The area surrounding the racking should be clear of obstructions, adequately lit, and without hazardous debris or spillages to help prevent incidents that could compromise the safety of the racks and create an unsafe working environment.
  • Health and Safety at Work Act 1974 – This legislation specifies that both employers and employees have a duty to themselves and others to ensure work-based activities do not cause unnecessary health and safety risks. In relation to pallet racking structures, employers should ensure sufficient safety and training whilst employees should always prioritise safety when working with or near the structures.
  • The Construction (Design & Management) Regulations 2015 – The design and installation of pallet racking is included in the scope of construction work due to its structural nature and purpose to uphold significant weight loads. This legislation incorporates safety considerations purposed to ensure the security of the structure throughout its design and build.
  • The Lifting Operations & Lifting Equipment Regulations 1998 (LOLER) – Forklift trucks are lifting equipment and are used in conjunction with pallet racking. This legislation minimises risk to the stability of the racking structure, by emphasising the need for regular FLT services and maintenance, operational competence through ongoing training and promotion of safe lifting practices.
  • Work at Height Regulations 2005 – Concerned with the safety of working at hight, these regulations can relate to the risks of falling associated with pallet placement and retrieval at height and stipulates that employers should first identify and asses the risks before implementing safety measures to reduce them such as FLT operator training and fall safeguarding equipment
  • Manual Handling Operations Regulations 1992 – The risks associated with the handling and movement of loaded pallets in and around the pallet racking structure must be identified and minimised under these regulations. Employers must ensure operator training for continual competence and a racking layout which supports the required FLT manoeuvres.
  • Management of Health and Safety at Work Regulations 1999 – Employers, in compliance with these regulations have a duty to identify workplace hazards, including those relating to pallet racking structures in terms of design, build, installation and ongoing use. In demonstrating measures taken to minimise risks, employers should keep records up to date concerning risk assessments, racking inspections, maintenance and training with emergency procedures in place, in case of collapse.

Failure to meet legal health and safety obligations as a business owner can have severe consequences, particularly if such negligence leads to a serious incident. Considered an offence with a real possibility of conviction, the implications can be very costly, can tarnish the reputation of the business and even lead to its closure.

pallet racking loaded with pallets

Trust WSL to help you manage risks in warehouse management

Since establishment in 1989, WSL has accumulated over 100 years of experience and expertise throughout our workforce. Whilst understanding that pallet racking is a vital resource, our team is also responsive to the major risks it may carry without proper design, installation and maintenance. We spare no effort to ensure the security and sufficiency of your warehouse as we persistently uphold the very highest safety standards.

Our commitment to safety and quality is reflected in our Approved Manufacturer Full SEMA Membership. More than an accreditation, this is testament to our role in setting industry benchmarks. By adhering to and shaping SEMA guidelines, we provide certified expertise, that gives your project the Full SEMA advantage.

Our fabricated products are UKCA certified, signifying compliance with the UK standards required for the market in Great Britain. UKCA replaced CE Marking in 2021 and prior to this, WSL had consistently held CE Marking accreditation since its introduction in 2014. Throughout our CE Marking retainment and now to ensure the continuation of our UKCA certification, our factory undergoes rigorous assessments on an annual basis.

SEMA & UKCA Accreditation Logo's

We specialise in all aspects of industrial storage projects with a team consisting of Technical Designers, Fabrication Engineers, Project Managers, Inspectors and Maintenance Specialists. All situated under the same roof which houses our offices and UKCA accredited factory, in Leeds, West Yorkshire, we ensure seamless communication and coordination, throughout every project.

Speak to a member of our team today! Call 0113 2045350 or email sales@wslmail.co.uk

Racking Maintenance and Safety – Frequently Asked Questions (FAQs)

  1. How often should pallet racking be inspected?

Your racking should be inspected at least every twelve months. Internal inspections carried out by trained employees periodically throughout the year is also advisable. Regularity would depend on the size and scale of the operation whether that’s daily, weekly or monthly.

  1. What are common types of issues discovered during internal inspections?

Common issues include twisted uprights, beam deflection, loose fittings, dislodged beam locks, and damaged baseplates. Inspectors should look out for areas impacted by forklift truck collision, including components that appear bent or out of alignment.

  1. Do team members require training before carrying out an internal racking inspection?

Yes. Staff should undergo racking inspection training, like the course offered by WSL which on completion, they will understand how to identify and report potential damage or areas of risk correctly and competently.

  1. What are the legal obligations for racking in the UK?

There are several UK Regulations which a safe, secure and well-maintained racking system can help promote conformity. These include:

PUWER 1998 (Provisions and Use of Work Equipment)

Health and Safety at Work Act 1974

Workplace (Health, Safety & Welfare) Regulations 1992

Management of Health and Safety at Work Regulations 1999

  1. Can damaged racking components be repaired, or must they be replaced?

Replacing damaged components is strongly recommended. It’s also important to ensure replacements are matched with the original manufacturer’s specifications. Mixing brands or attempting makeshift repairs is unsafe.

  1. What is the role of safety ancillaries in racking systems?

Ancillaries such as upright protectors, rack end barriers, guide rails and decking can help minimise the risk of collision, falling stock or structural compromise.

  1. What should I do if I suspect my racking is unsafe or believe it hasn’t been inspected for an extended period?

The advice would be to stop using immediately and contact a professional inspections provider like WSL. Our inspectors will assess the structure and advise o necessary actions to bring the system back into working order.

  1. Who is the Person Responsible for Racking Safety (PRRS)?

The PRRS is an individual within the organisation who is cited to oversee the safe use, inspections and maintenance of the racking. Their role is to ensure the racks undergo regular inspections and any issues are dealt with appropriately.

Get started

Discuss Your Project

Our service is completely client-centric. We provide all manufacturer types, as well as fitters, engineers and inspectors; which means that not only can we deliver your entire project from start to finish, but that we can provide a fully bespoke solution for your individual needs. Get in touch to find out more.