Case study

Navigating Complexity: The Crucial Role of Project Management in Pallet Racking

Aug 17, 2023 | Pallet Racking

Any process which involves the physical assembly of structures including pallet racking comes under the umbrella of construction, a sector overwhelmed by specific regulations, provisions, standards and codes of best practice. Navigating these requirements is essential during the very earliest planning stages right through to project completion and this commands the knowledge and expertise of a Project Manager.

Having laid the groundwork for a successful project execution, the Project Manager provides ongoing direction and supervision to ensure the project remains on course, including monitoring health & safety and wellbeing of all involved and maintaining standards throughout. Without this central role, the project is at risk of:

Causing accidental injury – A pallet racking installation involves the handling of significantly heavy loads, often at height, and if improperly handled, the risk of serious injury is very high. This weight bearing task requires the guidance and supervision of the Project Manager who is responsible for ensuring safe working practices throughout the build. The project manager must ensure:

  • There is a sufficient manpower at all times to complete the build safely.
  • The competency of the installation team by verifying that each member has acquired the training, qualifications, knowledge and experience to carry out the build effectively and safely.
  • Safety measures are in place, and that PPE is provided and always worn to protect the installers as they carry out the task.

Improper installation – Where a pallet racking installation is missing a Project Manager, there is a lack of planning and coordination and this can result in confusion and serious errors including missing materials, inaccurate component placement, dangerous/unsafe installation all of which can hinder the integrity of the structure.

A delayed completion – This can cause the warehouse serious issues as a postponed completion date will leave the operation behind schedule. When under the supervision of a Project Manager who has planned and implemented a workload breakdown and schedule, the build can follow specific timelines as it progresses from stage to stage.

Design issues – A pallet racking system that doesn’t meet the needs of the operation or provide effective space utilisation is likely to raise problems rather than being the solution it aims to be. Any given warehouse operation is unique and it’s the role of the Project Manager to consider the space available, items being stored, customers specific requirements and the customers’ budget.

Scope creep – Throughout the lifecycle of the project the scope of what was originally planned may change, this could be due to a requirement change once firm plans are in place, a customer wanting to consider a more budget friendly approach or a fundamental change in the whole project. A Project Manager needs to liaise with the customer throughout the project and ensure they finish the project with the best possible outcome.

Possible fines and legal implications – A pallet racking installation is an undertaking that doesn’t come without risks, however with the direction and supervision of a proficient Project Manager, these risks can be mitigated effectively. The most worrying is the risk posed to those constructing the system and to anyone working within the vicinity during the build and post-project. Serious personal injury is likely to incur hefty costs and bring about serious legal and reputational implications. Project Management acts as the defender against these outcomes by minimising the risks having identified them early and developed contingency plans in order to alleviate the likelihood of those risks becoming actualities.

A disappointing outcome – A pallet racking project without prior planning, time management, coordination, risk assessments, ongoing monitoring and an initial viable design is unlikely to deliver the desired outcome. Instead, it is probable that the poorly managed installation will result in operational issues, an unhappy customer and lack of future works.

Racking project risks

From Plans to Success!

Your pallet racking project will enter three stages, and these are pre-build, build and post-build, so what is the role and responsibilities of your Project Manager during these stages?

Pre-build stage – At this early planning stage the Project Manager will be engaged in setting the groundworks for a successful and incident-free installation. This will involve:

  • Drawing up the final design – Following from the initial sales drawing, the Project Manager will meticulously draw up a more comprehensive design. This design is a refined version of the original plan and often follows multiple replications with betterments in order to arrive at a design which is considered the most optimal and suitable. This is then approved by the customer before materials are ordered and the project really starts to take off.
  • Ensuring adequate access – The Project Manager will assess the installation space to ensure the team have efficient access which will allow large component parts and various required equipment to enter the area. The width, hight and location of entrances to the space will be assessed to ensure that large bulky pieces of equipment such as fork lift trucks (FLT) or scissor lifts can enter and use the space safely.
  • An assessment of the flooring – By conducting a thorough assessment of the floor conditions, the Project Manager can detect imperfections that may hinder the integrity of the structure. Early detection means that any issues with the floor can be rectified before the build begins which saves the build process from interruptions. The floor quality is pivotal to structural stability as a weak or uneven floor could cause the project to be cancelled.
  • Creating workable timescales – Due to the various stages, tasks and often trades involved, a pallet racking build can only run successfully if it follows a specific program which allows for coordination throughout the build. The Project Manager will draw this up using their knowledge and experience to gauge the time and resources required for each segment of the build. This reduces the risk of overlapping with tasks or trades running into each other, causing delays and disruption.
  • Organise any required equipment – It takes a certain amount of time and an experienced team to physically construct a pallet racking system, but it also requires the assistance of certain equipment. The FLT for example is required to assist with the transportation of large loads consisting of component parts whilst a scissor lift will be used to enable the team to work safely at hight to perform the actual install. The Project Manager will ensure that the team have access to these crucial pieces of equipment and will arrange for their arrival on site for the build.
  • Completing risk assessments and method statements (RAMS) – The completion of RAMS will allow the Project Manager to identify potential hazards and mitigate them by outlining specific measures and actions in preparation for the build. This will protect the safety and wellbeing of the installation team as well as the integrity of the structure. RAMS will guide a more efficient project with possible challenges already identified and addressed which eliminates the potential for disruptions. It also promotes good communication which assists with preparations by allowing all involved parties to receive crucial information ahead of the build.

Warehouse planning session

The Build – As the build gets underway, the Project Manager will oversee the works being carried out whilst ensuring coordination and resource management.

  • Time keeping – Set milestones are more likely to be met with the presence of a Project Manager who will ensure that the project stays on track. Where multiple trades are on site at the same time, communication and coordination between all parties is facilitated by the Project Manager who looks to ensure that all trades have the space and time to carry out their duties without delaying other trades.
  • Quality Control – As the build progresses, thorough inspections carried out by the Project Manager at regular intervals will ensure that the build meets the required quality and safety standards with any inconsistencies immediately identified and rectified.
  • Health and Safety – A crucial element of the Project Managers role during the pallet racking build is to ensure the health, safety and wellbeing of the team is maintained and that the working environment remains stable.
  • Budget Management – With the constant management and monitoring of costs, the Project Manager can ensure that the project will avoid any additional financial burdens.
  • Continuous Improvement – The most effective way of ensuring continuous progress is through dynamic RAMS as and when required. To achieve this the Project Manager must review the RAMS regularly to ensure updates are made in accordance to changes within the working environment. This promotes a continuous level of safety and efficiency even when the build is faced by changes.
  • Keep Records – Maintaining various records throughout the build is crucial in project management as it aids decision making, risk management, communication and progress. Record specifics will depend on the scale and complexity of the project but can include meeting minutes, progress reports, procurement details, delivery confirmations, incident reports, risk register, project plans, work schedules, costs and budgeting records.

WSL Project Manager overseeing the build

Post-build – Having delivered the pallet racking build, the Project Manager’s role continues with post-build responsibilities which are an integral part of the project’s lifecycle. These include:

  • Snagging – The Project Manager will now check the pallet racking structure, walking along every aisle checking the small details ensuring the installation has been carried out as planned, paying special attention to common problems including missing beam locks and that all anchoring, fixings and load notices have been correctly placed.
  • Formalising the completion – The Project Manager authorises the end of all activity and removal of any hired equipment.
  • Handover – The pallet racking system is ready to use! The project is handed over with a run-down of technical and operating instructions.
  • Concluding contracts – All project contract personnel and procurements are closed appropriately by the Project Manager with the issue of final payments and documentation.
  • Customer satisfaction – By solicitating feedback, an opportunity is created to ensure complete satisfaction and address any further concerns.

WSL Project Manager carrying out checks

Let’s Project Manage your Pallet Racking Installation!

The successful deliverance of your pallet racking installation designed, and project managed by WSL will be driven by the combination of specialist skills, traits and qualities possessed by each of our Project Managers. As a team our Project Managers who work alongside our Technical Designers share knowledge and support with each other whilst using their abilities as individuals to problem solve, lead, communicate and organise. The execution of every pallet racking solution produced by our Technical Designers is appointed a dedicated Project Manager who will stop a nothing to ensure the execution is time-efficient and on budget. Our customer focussed Project Managers strive to deliver value by keeping your needs and expectations at the forefront of everything they do.

Just for extra assurance, as WSL is a Full SEMA Member your entire project is in the hands of highly appraised industry experts who guarantee extremely high quality and safety standards. This is an advantage that can contribute to lower warehouse insurance premiums with better coverage as insurers feel better assured of risk mitigations.

If you have a potential pallet racking project in mind, call in the expertise of the WSL team today! Call 0113 2045350 or email sales@wslmail.co.uk

Get started

Discuss Your Project

Our service is completely client-centric. We provide all manufacturer types, as well as fitters, engineers and inspectors; which means that not only can we deliver your entire project from start to finish, but that we can provide a fully bespoke solution for your individual needs. Get in touch to find out more.